Tuttnauer EZ10 Autoclave
$0.00
This tabletop autoclave is designed for the sterilization of wrapped and unwrapped instruments and related items found in dental, medical and veterinary clinics, first aid rooms, hospitals, laboratories, life sciences and more. With the simplicity of one touch design, your sterilization and drying needs are fulfilled. The Tuttnauer EZ10 fully...
This tabletop autoclave is designed for the sterilization of wrapped and unwrapped instruments and related items found in dental, medical and veterinary clinics, first aid rooms, hospitals, laboratories, life sciences and more.
With the simplicity of one touch design, your sterilization and drying needs are fulfilled. The Tuttnauer EZ10 fully automatic autoclave will fill, sterilize, exhaust and dry at the touch of a button.
Features:
How It Works:
The Tuttnauer EZ10 autoclave is an electrically heated sterilizer using steam as the sterilizing agent. A computerized control unit ensuring a fully automatic sterilization cycle, control and monitoring of physical parameters and a clear documentation of the sterilization cycle controls the autoclave. The EZ10 has three automatic programs and one auxiliary drying program. The autoclave is equipped with an air compressor that, during the drying stage draws air through a HEPA filter (0.2µm). It pushes the air through the heated chamber to remove moisture and facilitate the drying operation. Drying is performed with the door closed. On all models, a water pump is installed between the water reservoir and the chamber. This pump guarantees fast and accurate filling of the chamber every time. Entry of water may be accompanied by a noise for approximately 30 seconds. This is normal noise generated by regular operation of the pump. The control system provides adequate protection, to ensure the safety of personnel and reliable operation with a minimum of shutdown time.
Features:
Closed door active drying system to maintain sterility and ensure efficient drying of packs and pouches. High efficiency air pump circulates hot air after the sterilization cycle for fast drying. Hepa filter 0.2 µm air filter (replaceable). Pre-loaded cycles for: unwrapped instruments, wrapped/packs, glassware and additional drying cycle. All program parameters can be customized and stored. Automatic shut off at the end of both the sterilization and dry cycles. Audible and visual cycle interruption alert. Double safety locking device prevents door from opening while chamber is pressurized. Low water sensor prevents activation of sterilization cycle when there is insufficient water in the chamber or reservoir. Constant monitoring of temperature and pressure for sterilization. Power outage recovery system. Door design prevents steam from coming in contact with control panel. Optional internal printer documents: date, time, temperature and pressure. 510k clearance for dental handpieces. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. International certifications
How It Works:
The Tuttnauer EZ10 autoclave is an electrically heated sterilizer using steam as the sterilizing agent. A computerized control unit ensuring a fully automatic sterilization cycle, control and monitoring of physical parameters and a clear documentation of the sterilization cycle controls the autoclave. The EZ10 has three automatic programs and one auxiliary drying program. The autoclave is equipped with an air compressor that, during the drying stage draws air through a HEPA filter (0.2µm). It pushes the air through the heated chamber to remove moisture and facilitate the drying operation. Drying is performed with the door closed. On all models, a water pump is installed between the water reservoir and the chamber. This pump guarantees fast and accurate filling of the chamber every time. Entry of water may be accompanied by a noise for approximately 30 seconds. This is normal noise generated by regular operation of the pump. The control system provides adequate protection, to ensure the safety of personnel and reliable operation with a minimum of shutdown time.
Standby Heating Mode:
The autoclave provides an option of heating the chamber in standby mode between cycles, with a very low power, in order to reduce total cycle time (1.6% of the total power only). The autoclave turns off automatically if the interval between the sterilization cycles is more than 2 hours. This feature is standard on model EZ10K and optional on EZ9 and EZ10 models.
Closed Door Drying:
Maintains sterility and ensures efficient drying of packs and pouches
Optional Printer
What's included with the purchase of a New Tuttnauer EZ10 Autoclave:
Tuttnauer EZ10 Autoclave Power Cord 4 Trays and one holder
Drain Tube
User Manual
The autoclave provides an option of heating the chamber in standby mode between cycles, with a very low power, in order to reduce total cycle time (1.6% of the total power only). The autoclave turns off automatically if the interval between the sterilization cycles is more than 2 hours. This feature is standard on model EZ10K and optional on EZ9 and EZ10 models.
Closed Door Drying:
Maintains sterility and ensures efficient drying of packs and pouches
Optional Printer
Related Products
Related Products
